S7 PLC HMI4.1.0 - Google Play
You'll be able to see results in few seconds.
Publisher Description
S7 PLC HMI -Turn your phone or tablet into an HMI panel for Siemens S7 PLCs over WiFi.
S7 PLC HMI turns your Android phone or tablet into a full HMI panel — no dedicated operator panel required. Connect over WiFi and monitor and control your machine in real time. Now speaks Modbus TCP as well as Siemens S7.
SUPPORTED DEVICES
• Siemens S7-1200, S7-300 and S7-400
• NEW: any device with Modbus TCP — other vendors' PLCs, energy meters, drives, gateways
• Direct connection over TCP/IP (WiFi) — no PC or extra hardware in between
• For S7: use a non-optimized DB (S7-300/400 compatible) with full access
OBJECT TYPES
• Simple object (bit or analog value: Byte/Word/Int/DWord/DInt/Real)
• Drive, Drive with local mode, Drive – two directions
• Dumper, Valve (each with local mode)
• Button (pulse) – momentary command
• Alarm with acknowledge – blinks until acknowledged
• Mode selector – Off / Auto / Manual
• Level bar – analog level indicator with scale
• Value with trend – live curve with a 1 / 5 / 15-minute window
KEY FEATURES
• Modern Material Design 3 interface
• Clear object list with live states and connection status
• Object control from a bottom sheet with large buttons
• Dark mode and system colors (Material You)
• App language switchable right from the menu – 9 languages incl. Dutch
• Optional analog value limits – out-of-range shown in red
• PLC diagnostics – RUN/STOP state and CPU info
• Graphic mode – place objects on your own background image and operate the machine from a custom screen
• Edit any object straight from the graphic mode or the list – tap it and use the pencil, even without a connection
MODBUS TCP (new)
• Any device that speaks Modbus TCP — PLCs from most vendors (ABB, Allen-Bradley, Schneider), energy meters, drives and gateways
• One device = one PLC group: IP address, port and Unit ID
• Devices on a serial RTU line through a Modbus TCP gateway
• Coils, discrete inputs, holding and input registers
• Type the address the way your documentation writes it — HR100, table 40101 or Schneider %MW100 — and see all three equivalents
• Byte order for 32-bit values (ABCD/CDAB/BADC/DCBA), per group or per object
• Write mode: single register or always FC16/FC15, for devices that need it
• Coefficient for 16-bit values — read 234 as 23.4
• Read-only spaces get no controls, so you can never write where the device would not accept it
• Built-in address examples for Siemens S7, Schneider Modicon, Allen-Bradley Micro8x0 and ABB, right in the object form
• Modbus help chapter one tap away from the PLC settings; connection test can be cancelled
PROFI FEATURES
• Connect to multiple PLCs and organize them into groups
• Object management – add, delete and reorder objects by dragging
• Backup and restore of your complete configuration
Your projects and data are fully preserved between updates.
IMPORTANT: For the S7-1200 use a standard (non-optimized) DB and enable full access in the block protection settings.
About S7 PLC HMI
The company that develops S7 PLC HMI is Prumsys. The latest version released by its developer is 4.1.0.
To install S7 PLC HMI on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-25 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the S7 PLC HMI as malware if the download link to cz.prumsys.s7plchmi_profi is broken.
How to install S7 PLC HMI on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the S7 PLC HMI is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by S7 PLC HMI will be shown. Click on Accept to continue the process.
- S7 PLC HMI will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
Program Details
System requirements
Download information
Pricing
Version History
version 4.1.0
posted on 2026-10-25
• NEW: Modbus TCP – PLCs from other vendors, energy meters, drives and gateways over WiFi• Coils, discrete inputs, holding and input registers; addresses as HR100, 40101 or %MW100• Byte order for 32-bit values, coefficient for 16-bit values• Address examples for S7, Schneider, Allen-Bradley, ABB; Modbus help from PLC settings• Edit an object with the pencil straight from the graphic mode or the list• Cancellable connection test; unreadable backups are refusedYour data is fully preserved.
version 4.0.1
posted on 2026-09-09
Completely redesigned interface (Material Design 3): object list with live states, bottom-sheet control, dark mode and system colors.
• NEW objects: Button (pulse), Alarm with acknowledge, Mode selector, Level bar, Value with trend
• NEW trend chart 1 / 5 / 15 min
• NEW PLC diagnostics – RUN/STOP and CPU info
• Quick PLC switching from the title bar
• App language switchable from the menu (9 languages, Dutch added)
• Graphic mode unchanged, your projects work 1:1
Your data is fully preserved.
version 4.0.1
posted on 2026-09-09
Completely redesigned interface (Material Design 3): object list with live states, bottom-sheet control, dark mode and system colors.
• NEW objects: Button (pulse), Alarm with acknowledge, Mode selector, Level bar, Value with trend
• NEW trend chart 1 / 5 / 15 min
• NEW PLC diagnostics – RUN/STOP and CPU info
• Quick PLC switching from the title bar
• App language switchable from the menu (9 languages, Dutch added)
• Graphic mode unchanged, your projects work 1:1
Your data is fully preserved.
version 3.05
posted on 2026-06-12
Minor fix
version 3.01
posted on 2026-03-07
Application redesign
Fixed backup/restore bug
Support for new Android version
Fixed minor bugs
Disclaimer
Official Google Play Link
We do not host S7 PLC HMI on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for S7 PLC HMI is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.



